The D6802 is an 8-bit MPU IP Core – synthesizable and fully compatible with the Motorola MC6802. It can be used as a direct replacement for the MC6802 Microprocessor. Two software-controlled power-saving modes – WAIT and HALT are available to preserve additional power. These modes make the D6802 IP Core especially attractive for automotive and battery-driven applications. It is fully customizable – delivered in the exact configuration, to meet your requirements. There is no need to pay extra for unused features and wasted silicon. The D6802 comes with a fully automated test bench with a complete set of tests, allowing easy package validation at each stage of the SoC design flow. Each DCD’s D68XX Core has built-in support for a proprietary Hardware Debug System – DoCD™. It is a real-time hardware debugger that provides debugging capability of a whole System-on-Chip (SoC). Unlike other on-chip debuggers, the DoCD™ provides non-intrusive debugging of running applications. It can halt, run, step into or skip instruction and read/write any contents of the microprocessor.
All DCD’s IP Cores are technology independent which means that they are 100% compatible with all FPGA & ASIC vendors e.g.
- Altera / Intel,
- Xilinx / AMD,
- Microsemi / Microchip,
- SK Hynix
- Cycle compatible with original implementation
- Software compatible with MC6802 industry standard
- De-multiplexed Address/Data Bus, to allow easy memory connection
- Two power saving modes: HALT, WAIT
- Fully synthesizable
- Static synchronous design
- No internal reset generator or gated clock
- Scan test ready
- USB, Ethernet, I2C, SPI, UART, CAN, LIN, HDLC, Smart Card interfaces available
|IP Core||Architecture type||Memory space||DoCD||UART (SCI)||SPI M/S||IO Ports||Watchdog Timer||Timer||Compare / Capture||Pulse accumulator||READY pin||Chip Selects||Gatecount|
Power of Innovation is our primary target. That’s why our R&D focuses on every single IP Core detail. As a result of that concern, some unique solutions were born. One of them is the 68XX on-Chip Debugger (DoCD™), which is a complete debugging system dedicated for all 68XX Cores offered by DCD.Read more
The D6803 is a synthesisable SOFT Microcontroller IP Core, fully compatible with the Motorola MC6803. It can be used as a direct replacement for...
+delivered in the exact configuration
+ power-saving mode - WAIT
+ I/O Wrapper
The DF6802 is an 8-bit synthesizable MPU IP Core, software-compatible with Motorola MC6802. It has an enhanced internal architecture which...
+ software compatible with MC6802
+ 4 times faster than the original
+ power saving modes: HALT & WAIT
The DF6803 is a synthesizable SOFT MCU IP Core, fully software compatible with Motorola MC6803. It has an enhanced internal architecture which allows...
+ 4 times faster than original 6803
+ software compatible with MC6803
+ I/O Wrapper making it pin compatiblecore